New Faymonville MAX210-Z-3AA-13.60-22.5-2.54 / 2X EXTENDABLE UP TO 29m / 3X HYDR platform semi-trailer
≈ $130,800
Roosendaal
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Netherlands 
36,525 kg
Net weight
11,475 kg
Netherlands, Veghel
34,830 kg
Net weight
10,170 kg
Netherlands, Roosendaal
34,830 kg
Net weight
10,170 kg
Netherlands, Roosendaal
34,830 kg
Net weight
10,170 kg
Netherlands, Roosendaal
35,650 kg
Net weight
9,350 kg
Netherlands, Roosendaal
34,830 kg
Net weight
10,170 kg
Netherlands, Roosendaal
13,638 kg
Net weight
27,862 kg
Netherlands, Gilze
Netherlands, Veghel
Netherlands, Sassenheim
Netherlands, Veghel
61,300 kg
Czechia, Radonice
Denmark, Aabenraa
84,000 kg
Net weight
19,000 kg
Netherlands, Gendt
60,000 kg
Net weight
8,400 kg
Netherlands, Schiedam
44,420 kg
Net weight
8,480 kg
Germany, Essen-Bergeborbeck
37,580 kg
Net weight
10,420 kg
Netherlands, Veghel
Denmark, Aabenraa
Denmark, Aabenraa
34,760 kg
Net weight
13,240 kg
Netherlands, Renswoude
37,540 kg
Net weight
8,465 kg
Germany, Essen-Bergeborbeck
- Air suspension
- BPW-axles
- Disc brakes
= Remarks =
NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock
Technical characteristics MAX210-Z-3AA-13.60-22.5-2.54
Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Own weight: 11,456 kg / Payload approx.: 36,544 kg / Loaded coupling height: 1150->1250 mm / Steering radius: 2300 mm /
Loading floor length: 13,600 mm / 2x extendable (2x 770 mm) to 2,900 mm / Wheelbase: 1,810 mm
Technical description
Extendable loading floor with pneumatic locking / On the central box section there is a fixed intermediate table of + - 250 mm / 8 pair of outward-folding tie-down rings (LC 5,000 daN) / 3 pairs of outward-folding tie-down rings (LC 10,000 daN) / Cutouts in the outer frame for hooking in lashing straps. (LC 2,000 daN)
Tires:
Tires 385/65 R22.5 (Brand: GoodYear)
TPMS:
TPMS tire pressure monitoring system compliant with ECE R 141 standards
Axles:
BPW axles with disc brakes, air-suspended with lift and lower valve. All axles hydro-mechanically forced steering / Technical axle load: 10,000 kg (ET 0)
Braking system:
WABCO braking system, according to EU regulations, with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure:
Steel structure made of high-grade fine-grain steel.
Steel grades; **S355J2+N/S355MC (elastic limit 355MPa) / **S690QL/S700MC (elastic limit 690MPa)
Electrical system:
Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3).
ASPÖCK-UNIBOX on the galvanized terminal panel at the front with 24N, 24S & 15-pin sockets.
Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098
Width warning signs:
Below the gooseneck and at the rear, on the left and right, a holder for warning signs with a socket. Options included
• Front and rear maneuverability via a cable remote control with PDC light control for straightening the axles. (without installation to the tractor)
• Electro-hydraulic power unit (approx. 45 kg).
• 2 Wheel chocks with holder on the bulkhead. • King pin 2"
• A galvanized steel bulkhead, approx. 1600 mm height. EN12642-XL
• White reflector tape according to EU regulations along the length and extension. Red at the rear.
• EU marking boards (red-yellow) at the rear of the vehicle.
• Holder for a plug-in beacon at the rear of the vehicle.
• Loading floor consists of a 30 mm hardwood floor, reinforced with omega profiles (approx. 298 kg)
• 10 pairs of stake pockets approx. 100 x 50 mm in the outer frame of the loading floor.
• 1 spare wheel holder, under the loading floor on the right.
• BEKAMAX (Pico) central lubrication system with 2 pumps
• 6 pairs of recesses in the loading floor for WADER container locks, for 1x 20' or 2x 20' or 1x 40' or 1x 45' containers
• 5 pairs of stake box profiles, transversely mounted in the loading floor, for stakes 100x50mm
• galvanized storage space under the loading floor (2390x720x400mm)
• rope hooks (8mm), all approx. 500mm below the edge profile of the gooseneck and the loading
= More information =
Axle configuration
Tyre size: 385/65-R22.5
Brakes: disc brakes
Suspension: air suspension
Rear axle 1: Max. axle load: 10000 kg; Steering; Tyre profile left: 100%; Tyre profile right: 100%
Rear axle 2: Max. axle load: 10000 kg; Steering; Tyre profile left: 100%; Tyre profile right: 100%
Rear axle 3: Max. axle load: 10000 kg; Steering; Tyre profile left: 100%; Tyre profile right: 100%
Functional
Make of bodywork: MAXTRAILER 210-Z-3AA-13.60-22.5-2.54
Condition
General condition: very good
Technical condition: very good
Visual appearance: very good
Additional information
Please contact Arne Honingh for more information